Blastrite®

High-Quality Abrasives

Blastrite® is a specially selected and graded Platinum slag with sharp angular
particles, black in colour and particularly resistant to fracturing on impact.

With nearly a decade of experience, Blastrite continues to produce the best product in it's class, reliably shipping hundreds of tonnes daily globally.

A Proven, High Quality Machine.

BLASTRITE® Platinum Grit

Blastrite® is used where expendable abrasives are required for onsite abrasive blasting in shipyards, steel construction, oil refineries, power stations, offshore oil rigs and any blasting yard designed for diverse and flexible applications. The product is specially graded to optimise production whilst achieving designated surface preparation standards according to industry norms.

 

Particularly resistant to fracturing on impact.

  • Silica, crystalline: None
  • Si02: 40 - 50%
  • Fe203: 15 - 35%
  • Mg0: 15 - 25%
  • Al203: 5 - 10%
  • Ca0: 5 - 10%
  • Cr203: 1 - 5%
  • Grade: B125, Size range: 0.5 - 2.5 mm, Profile range: 110 - 140 microns
  • Grade: B90 , Size range: 0.2 - 1.4 mm, Profile range: 70 - 110 microns
  • Grade: B60, Size range: 0.1 - 1 mm, Profile range: 50 - 75 microns

SSPC-AB1 Certified

 
 

Asbestos Free Certification

Passed LC 50 Standard - chemically safe and will not harm aquatic life

CARB (California Air Ressources Board) Certification - the most vigorous air emission standard in the world

Airborne levels of heavy metals such as Beryllium and Chronium all well under the OSHA Permissible Exposure Limits (PELs)

Waterjet cutting grade:

Range: W80, Size: 150 – 425 microns Range: W120, Size: 125 – 300 microns

Blasting grade:

Grade: 20/60, Size range: 250 – 850 microns
Grade: 30/60, Size range: 250 – 600 microns
Grade: 20/40, Size range: 425 – 850 microns

A Proven, High Quality Machine.

Microblast® Platinum Grit

Microblast® is a natural mineral abrasive, reddish/pink in colour, predominantly almandite consisting of sub-angular particles mined from an alluvial resource.

  • Produces a rough, uniform, matte finish with a sharp texture.
  • The grain shape and high bulk density result in a fast cutting and stripping abrasive.
  • May be disposed of in non-hazardous waste dumping sites unless contaminated with other hazardous materials.
  • Can be recycled up to five times without loss of performance, resulting in lower shipping, handling, collection and disposal costs.
  • Blast cleaning using garnet produces significantly lower dust emissions than other blast abrasives - resulting in minimal disruption and danger to adjoining operations, improved operator visibility, and lower cleanup costs.
  • Si02: 33%
  • Fe2O3: 33%
  • Ti0: 1%
  • AI2O3: 23%
  • CaO: 4 %
  • MgO: 4%
  • MnO2: 1%
  •  

Other Solutions Dry Ice

Get I touch with our team of agents. 

How does it clean?

Dry ice cleaning uses solid CO, a non-abrasive media that won't damage surfaces or equipment. The super cooled dry ice pellets or particles are accelerated at supersonic speeds and sublimate on impact, resulting in the surface being cleaned, lifting dirt and contaminants off the underlying substrate

How it works...

Instead of abrasive media to grind surfaces (and damage them), Cold Jet uses dry ice (Solid CO2) accelerated at supersonic speeds that sublimate upon impact and lift contaminants from substrates.

Our Latest News

See our dry ice solutions in action

Construction Restoration with Dry Ice Blasting

Construction Restoration with Dry Ice Blasting

Construction restoration is a challenging project to get over with, especially for old buildings and historical sites. With the help of dry ice blasting, you can save up plenty of time and bring back the appealing appearance to its original state! In this article, let’s learn more about construction restoration with dry ice blasting with […]

Cleaning wooden beams efficiently using dry ice blasting

Cleaning wooden beams efficiently using dry ice blasting

Wooden beams can accumulate dirt, dust, grime, and other debris over time, which can make them look unsightly and even cause health problems for people. Over time, it takes a lot of effort to restore the wooden beams back to their original state but now it is much easier with dry ice blasting method. In […]

 Can dry ice be used to clean electrical components

 Can dry ice be used to clean electrical components

The  dry ice blasting machine is used to clean the surface of many production equipment, especially the stains on the surface of the injection mold in the manufacturing industries. In addition, the dry ice machine is also used for maintenance and general cleaning of factories and workshops. With such a powerful cleaning ability, can the […]

Industry Overview

By Applications

We've been able to cut back on our use of chemical solvents. We use about 25% of what we used to, which makes us a much more environmentally responsible company

Matt Schrift Engineer Robotworx

It's better for the people and for the environment. This technology has shaved time and allowed us to reduce our use of chemicals.

Bob Hawkey Vers-Trim

Using dry ice cleaning reduces harmful air emission and generally creates no addition to the volume of the cleaning process waste stream...in-process machinery can be cleaned on-line, resulting in decreased labor cost and less down-time.

EPA 905-F-00-026 EPA technical fact sheet for TCA hazard and alternatives