Leader in  
Environmental Cleaning & Conservation Technologies

How Dry Ice Cleaning Can Extend Life Of Rubber Molds?

How Dry Ice Cleaning Can Extend Life Of Rubber Molds?

Share This Post

Table of Contents

The rubber molds are used in the manufacturing process of many industries. The process of manufacturing the rubber molds is complicated and time-consuming. They have to be cleaned regularly to keep them in shape and extend their life. Dry ice cleaning is one such method which can be used

Mold Cleaning Issues

Mold cleaning is a very important part of rubber mold maintenance. It is required to remove dirt and grease, as well as other contaminants that have built up on the surface of the mold. Additionally, if you are using a release agent in your molds, then it must be removed with each cleaning.

Why dry ice cleaning in Molds Maintenance?

Dry ice cleaning is a non-invasive method of removing unwanted material from rubber molds. In addition, it also helps in reducing the cost of maintenance.

Dry ice cleaning in Molds Maintenance has several advantages over other methods:

  • It is an efficient way of removing unwanted material from rubber molds. This method can be used both for internal and external surfaces.
  • It is a safe way of removing unwanted material from rubber molds without damaging their surface properties or any part of the molding machine used to produce the products made out of them (i.e., injection presses).
  • It can be used even after hours because it does not require any chemical substances that might affect your health or environment when inhaled during work hours; hence, there are no risks associated with using dry ice powder during night shifts as well!

How Dry Ice Cleaning Can Extend Life Of Rubber Molds?

Dry ice cleaning is a common and effective way to clean rubber molds. However, many people do not realize that dry ice cleaning can also extend the life of rubber molds. It is an efficient, cost-effective and environmentally friendly method for cleaning mold cavities.

Dry ice cleaning works by using dry ice pellets to blow away dirt, rust on surfaces and in hard to reach mold cavities. This produces a clean surface that does not require any additional processing or washing with water or chemicals before bonding with the next layer of rubber compound. The use of dry ice also reduces handling costs associated with other methods such as hot water washing and high pressure washing, which often result in damage to rubber molds due to shock loading during application.

How Dry Ice Cleaning Works on Rubber Molds?

Rubber molds are used for a variety of purposes, including making toys, car tires and other products. The molds are usually made from silicone or urethane rubber. In order to make these molds, a mold maker must first create the mold’s design on paper or in digital format. The mold maker then creates a negative from this design by pouring liquid silicone into a mold cavity and letting it set. Once the silicone hardens, it’s ready for use in production.

However, over time, these rubber molds start to deteriorate because they are exposed to air pollution and other contaminants that can degrade their quality over time. This is why many companies rely on dry ice cleaning as an alternative method of removing dirt particles from inside their molds while also extending their lifespan so that they can be used again and again.

Dry ice cleaning is a non-invasive way of removing unwanted material from rubber molds.

Dry ice cleaning is a non-invasive way of removing unwanted material from rubber molds. This process uses dry ice pellets to remove the unwanted materials on the surface of a rubber mold by freezing it and then scraping off the frozen material.

The dry ice cleaning process does not damage your mold or rubber, as compared to other traditional methods that use abrasive powders and chemicals which could permanently damage your molds.

It also does not change the consistency or color of your rubber compound, as compared to other methods which can be very harmful for parts made from this type of material

In conclusion, dry ice cleaning is a perfect solution to remove polymer release agents that have been baked on molds by the high heat of vulcanization. Dry ice cleaning is also an environmentally friendly method that is non-toxic and non-hazardous because it simply uses carbon dioxide at low temperature to clean molds without a need for solvents or residue removal. In addition, it doesn’t damage the surface of your mold because it doesn’t use harsh chemicals which can cause corrosion over time.

Nga Dang Thi Thuy

Nga Dang Thi Thuy

Commercial Executive
+84 (0) 383370895

We Offer Cleaning & Rental Services

Our service team is available 24/7, 365 days a year and is dedicated to providing support and advice on all aspects of our machines.

Specco2- Mini

Specco2- PROsi

Specco2- PROi

Đặt hàng dùng thử?

Chúng tôi rất vui khi đến cơ sở của bạn và làm sản phẩm dùng thử chuyên nghiệp cho bạn. Vui lòng liên hệ với chúng tôi bằng cách điền vào biểu mẫu bên dưới, để chúng tôi có thể sắp xếp thời gian phù hợp với bạn nhất.

Book A Demo?

We are happy to come to your facility and do a professional product demo for you. Please contact us by filling the form below, so we can schedule a time that suits you best.

Interested in our Equipments?

Get in touch with our team of agents.