When cleaning machinery or injection molds in the plastics and composites industry with a dry ice blasting machine, you will not have to disassemble the device. This helps the machines stay in production condition and maintain the highest level of productivity. Let’s find out with Specco2 why using a dry ice machine helps you not need to disassemble the device.

What is a dry ice blasting machine?
The dry ice machine is a modern industrial cleaning device, often used to clean injection molds in the plastics and composites industry. In addition to industrial use, the dry ice blasting machine is also used to clean wooden surfaces in civil works or remove old wall paint that conventional cleaners cannot do.
The main raw material to operate the dry ice machine is CO2 dry ice. CO2 dry ice is actually carbon dioxide in its solid state. To produce dry ice, people freeze dry ice at -78.5 degrees Celsius and store them in specialized insulated containers.
Do you need to disassemble your equipment for using dry ice blasting machine?
In fact, when you use the dry ice blasting machine in the plastics and composites industry, you won’t need to disassemble your equipment.
The reason is because when using Specco2’s dry ice machine, you will be provided with a variety of nozzles, from which you can use each type of nozzle to suit your cleaning needs.
You can even clean in small corners that seem like you have to disassemble the device for cleaning. From there it shows that you do not necessarily need to stop the operation of the machines and disassemble them to conduct cleaning.
Dry ice blasting machine for cleaning injection molds for the plastic and composite industry
Built on ground-breaking Aero2 technology, the Aero2 PLT 60 is designed for applications that require more robustness, making it the most efficient dry ice machine available. With that dry ice blasting machine, you don’t need to disassemble your equipment.
The SureFlow feeding system, not only helps users to minimize air pressure loss but also maximizes air supply capacity and limits dry ice waste. In addition, the Aero2 PLT 60 features a 7” LCD with digital controls, providing an intuitive display that allows the user to easily view, program, or adjust the firing parameters as well as the machine’s installation such as setting and saving burst pressure and feed rate parameters.
PLT 60 is IoT-enabled through SPECCo2’s 4.0 technology solution, SPECCo2 CONNECT®. The system provides remote monitoring and diagnostic capabilities.

Conclusion
Thus, it can be seen that a dry ice machine can completely help your businesses save time by limiting the disassembly of equipment. To learn more about this modern cleaning device, you can contact Specco2 directly for a free consultation.