Leading in 
 dry ice technology

Olivo Eutectic Plates

Eutectic liquid

Seven qualities of eutectic liquid are used to maintain positive, negative or “warm” temperatures in all the climatic conditions encountered in transport.

Choosing the coolant pack suited to your needs requires combining the thermal power of the plate and the temperature required. Don’t hesitate to contact us, we can advise you easily on:

- the choice of the temperature of the plate

- how many eutectic plates you will need to use

The temperature in an insulated container refrigerated with cold eutectic plates can be maintained for 24 hours or more.

Our Eutectic Plates

By Olivio Cold Logistic

Eutectic plate TOP 900

Length: 610 mm
Width: 380 mm
Height: 43 mm
Unloaded weight: 9,3 Kg




Eutectic plate TOP 780

Length: 650 mm
Width: 402 mm
Height: 35 mm
Unloaded weight: 8,5 Kg




Eutectic plate TOP 580

Length: 595 mm
Width: 316 mm
Height: 35 mm
Unloaded weight: 5,4 Kg




Eutectic plate TOP 370

Length: 620 mm
Width: 420 mm
Height: 35 mm
Unloaded weight: 8,8 Kg




Eutectic plate TOP 130

Length: 510 mm
Width: 445 mm
Height: 35 mm
Unloaded weight: 6,9 Kg




Eutectic plate TOP 70

Length: 530 mm
Width: 410 mm
Height: 55 mm
Unloaded weight: 9,0 Kg




Eutectic plate TOP 55

Length: 355 mm
Width: 225 mm
Height: 32 mm
Unloaded weight: 2,0 Kg




Eutectic plate TOP 25

Length: 304 mm
Width: 250 mm
Height: 45 mm
Unloaded weight: 2,4 Kg




Eutectic plate GASTRO 1/1

Length: 530 mm
Width: 325 mm
Height: 35 mm
Unloaded weight: 5,3 Kg




Eutectic plate GASTRO 1/3

Length: 325 mm
Width: 176 mm
Height: 30 mm
Unloaded weight: 1,4 Kg




Eutectic plate TOP 64

Length: 364 mm
Width: 170 mm
Height: 20 mm
Unloaded weight: 1,0 Kg




Eutectic plate CARTRIDGE 500 CC

Length: 220 mm
Width: 148 mm
Height: 20 mm
Unloaded weight: 0,6 Kg




Eutectic plate CARTRIDGE 250 CC

Length: 195 mm
Width: 90 mm
Height: 20 mm
Unloaded weight: 0,3 Kg




Frequently Asked Questions

FAQs

Freezing process for cold eutectic plates.

The eutectic liquid must be completely frozen (solidified) before you can use the eutectic plate. If you can hear or see the liquide moving, it means that there are not enough frigories in the eutectic liquid and the cold capacity will be reduced.

The freezing temperature of the eutectic plate must be at least 5°C below the eutectic liquide melting temperature. For example, a « -17°C » plate (which means that its melting point is -17°C) must be frozen at least at -22°C.
In order to speed up the freezing process, the eutectic plates must be separated from one another in the freezer (at least by 3 cm). If they are piled up, the cold cannot circulate between them, which significantly increases the freezing time.
You can control the freezing of your cold accumulators either visually if the cover is transparent or dynamically by shaking the plate. Any movement resulting from a liquid or semi-liquid state indicates that the eutectic solution is not deeply frozen.

The freezing time can vary from 6 to 24 hours depending on the refrigeration unit used. Permanently keeping a second set of eutectic plates in the refrigeration unit ensures the immediate availability of the cold.

The OLIVO ambient eutectic plates allow to maintain an inside temperature between +15°C and +25°C in extreme outside (hot or cold) temperatures :
o Maintain chocolate at around +20°C with an outside temperature of +35°C

Maintain a pharmaceutical product at +20°C when the winter temperature is -10°C
The ambient eutectic plate is used just like a cold eutectic plate. The preparation before use is different.
In winter conditions (outside temperature -10°C) :
o The ambient eutectic plate must be placed in a room at +25°C or more. The solid eutectic solution becomes liquid above +25°C.
o Once in a container, the liquid eutectic plate will compensate the heat losses of the inside products and maintain the temperature above +15°C.
In summer conditions (outside temperature +35°C) :
o The ambient eutectic plate must be cooled down at a temperature below +15°C. Below +15°C, the eutectic solution becomes solid.
o Once in a container, the solid eutectic plate will release its frigories to compensate the heat inputs and maintain the temperature below +25°C.

Interested in our Equipments?

Get I touch with our team of agents. 

How does it clean?

Dry ice cleaning uses solid CO, a non-abrasive media that won't damage surfaces or equipment. The super cooled dry ice pellets or particles are accelerated at supersonic speeds and sublimate on impact, resulting in the surface being cleaned, lifting dirt and contaminants off the underlying substrate.

 

How it works...

Instead of abrasive media to grind surfaces (and damage them), Cold Jet uses dry ice (Solid CO2) accelerated at supersonic speeds that sublimate upon impact and lift contaminants from substrates.

Our Latest News

See our dry ice solutions in action

 Can dry ice be used to clean electrical components

 Can dry ice be used to clean electrical components

The  dry ice blasting machine is used to clean the surface of many production equipment, especially the stains on the surface of the injection mold in the manufacturing industries. In addition, the dry ice machine is also used for maintenance and general cleaning of factories and workshops. With such a powerful cleaning ability, can the […]

How to safely clean delicate electronics with dry ice?

How to safely clean delicate electronics with dry ice?

As mentioned before, besides being used to clean molds in industries, dry ice machines are also used to clean and sanitize electronic devices such as electronic boards, In this article, Specco2 will guide you to clean electronic equipment safely with a dry ice blasting machine When will you need to clean electric equipment After a […]

Soda blasting vs Dry ice blasting

Soda blasting vs Dry ice blasting

When it comes to surface cleaning or surface preparation, there are many methods available. Dry ice blasting and soda cleaning are two of the most popular methods chosen by many businesses. However, choosing the most optimal method is not easy. In this article, Specco2 will introduce you to the comparison between the dry ice machine […]

Industry Overview

By Applications

We've been able to cut back on our use of chemical solvents. We use about 25% of what we used to, which makes us a much more environmentally responsible company

Matt Schrift Engineer Robotworx

It's better for the people and for the environment. This technology has shaved time and allowed us to reduce our use of chemicals.

Bob Hawkey Vers-Trim

Using dry ice cleaning reduces harmful air emission and generally creates no addition to the volume of the cleaning process waste stream...in-process machinery can be cleaned on-line, resulting in decreased labor cost and less down-time.

EPA 905-F-00-026 EPA technical fact sheet for TCA hazard and alternatives

    We Offer Cleaning & Rental Services

    Our service team is available 24/7, 365 days a year and is dedicated to providing support and advice on all aspects of our machines.

    Aero 40FP

    SDI 60

    Xcel 6

    Book A Demo?

    We are happy to come to your facility and do a professional product demo for you. Please contact us by filling the form below, so we can schedule a time that suits you best.

    Interested in our Equipments?

    Get in touch with our team of agents.