The E-CO2 150 combines a Cold Jet dry ice blasting machine (PLT 60, Aero® 80 or C100) with a custom 1.5 cubic feet pressurized abrasive pot. The system has been developed specifically to feed Cold Jet’s proprietary mix of dry ice and an abrasive medium to ensure dust is significantly lowered by up to 97%, well below OSHA guidelines (3rd party verified).
Traditional methods for corrosion and industrial coating removal lead to a considerable amount of respirable dust and secondary waste and often leave residue or moisture on the surface being cleaned.
That’s why we designed the E-CO2 150. It combines a Cold Jet dry ice blasting machine (PLT 60, Aero® 80 or C100) with a custom 1.5 cubic feet pressurized abrasive pot. The system has been developed specifically to feed Cold Jet’s proprietary mix of dry ice and an abrasive medium to ensure dust is significantly lowered by up to 97%, well below OSHA guidelines (3rd party verified).
By utilizing our patented SureFlow System, a full 150lb load can be run through the system without the risk of clogging. This ensures that the E-CO2™ 150 will maintain a pulse-free blast stream that cleans uniformly on every pass.
With automated hopper agitation and the ability to operate with long lengths of hose, the E-CO2 150 will let you clean in locations never before possible without fear of downtime.
The custom blast pot enables users to experience accurate dosing of abrasive material, self-regulating capabilities and integration of applicator control mechanisms to ensure dry ice and the abrasive feed together simultaneously when the trigger is pulled.
The E-CO2™ 150 also offers a stronger degree of versatility, allowing for non-destructive cleaning with just dry ice and also more aggressive cleaning with Cold Jet’s propriety abrasive mix while remaining environmentally responsible. You can feel confident in knowing that once you pull up to a job that you’ll be able to tackle it with the E-CO2™ 150.
Maintenance Plan
Find a maintenance plan or schedule a safety and preventative maintenance inspection.
Custom 1.5 CU FT pressurized abrasive pot
Self regulating capabilities
Integration of applicator control mechanisms
The Specialty Dry ice blaster that Specco2 distributes exclusively in Vietnam is designed to be easy to use without having to spend time tinkering.
You just need to put the dry ice in the Specialty Dry ice blaster and adjust a few parameters according to your needs. Then start the machine to start using
In Vietnam market, Specco2 is proud to be the official partner to supply Dry Ice Blaster of Coldjet. Some product lines distributed by Specco2 are:
As mentioned above, Specialty Dry ice blaster is used for the unique applications that require special features like pneumatic only machinery and abrasive cleaning with minimal waste
More specifically, some industries that the Specialty Dry Ice Blaster can be applied are:
It is best to keep your dry ice in good insulated container.
If you don’t know what is insulated container, please read the article we just mentioned
In addition to the above types of Dry Ice Blaster, Specco2 also provides the machine’s accessories. Customers will not have to spend too much time looking for other replacement parts.
The cleaning method with a Specialty Dry ice blaster is considered the most environmentally friendly cleaning technique for machinery and equipment today. Dry Ice is an approved material by the EPA, FDA and USDA and is the optimal choice over other cleaning methods.
Get I touch with our team of agents.
We've been able to cut back on our use of chemical solvents. We use about 25% of what we used to, which makes us a much more environmentally responsible company
Using dry ice cleaning reduces harmful air emission and generally creates no addition to the volume of the cleaning process waste stream...in-process machinery can be cleaned on-line, resulting in decreased labor cost and less down-time.
Stay updated with our new equipment updates, accessories and more.
Our service team is available 24/7, 365 days a year and is dedicated to providing support and advice on all aspects of our machines.
We are happy to come to your facility and do a professional product demo for you. Please contact us by filling the form below, so we can schedule a time that suits you best.
Get in touch with our team of agents.