Leading in 
 dry ice technology

Olivo insulated container for Cold Chain Logistics 

Olivo Insulated Container

Because it keeps your products at the right temperature during transport, the OLIVO insulated container has been adopted by logistics operators in numerous fields: supermarkets, food distribution, mass catering, health and biomedical products, dry ice totes, and many others.

More specifically, OLIVO insulation containers are manufactured from environmentally friendly materials and use cold sources that can be reused many times.

Effective cooling

Insulated containers are designed to maintain the cold chain during transport. The insulating capacity of the container protects your products from the ambient heat. Adding a cold source increases the cold storage time during transport.

Cooling capacity

The products stored at the right temperature are loaded into the insulated container.

Cooling the container is intended to compensate for the entry of heat into the insulated container and keep the interior temperature constant throughout the transport time.

With the right amount of frigories (cooling capacity) the temperature of the load will remain stable until delivery and will not gain or lose heat.

Mastering energy

OLIVO cooling consumes very little energy as the heat loss during transport is both known and limited.
Delivering to several customers using a refrigerated lorry uses a lot of energy. Every time the door is opened the air inside the vehicle is heated up and cooling it again rapidly consumes an enormous amount of energy.

Green energy

OLIVO eutectic solutions are stable, non-toxic and do not degrade over time.
The CO2 constituting the dry ice is a “2nd use” gas. It is CO2 generated by industrial processes that has been recovered and purified before being reused to make dry ice. Using dry ice does not emit more CO2 into the atmosphere.

Air temperature

A recorder measures the air temperature inside the cold insulated cabinet. The temperature inside an insulated cabinet remains very homogeneous. The differences observed between the warmest and the coldest points are below the 2°C tolerance accepted for the maximum temperature variation.

Fill rate

It is pointless transporting empty space: optimise your transport costs by ensuring containers are full of goods. The container fill rate does not directly influence the amount of cooling required. But it will contribute to achieving a good thermal result.
The homogeneity and stability of the interior temperature are better in a well filled refrigerated container.

Our Insulated Containers

By Olivio Cold Logistic

Bac 55

AmbientChilledFrozenQuarter ISO pallet 1000 * 1200 carte 600 * 40053 Liters600 * 500 * 580 mm

Bac 130

AmbientChilledFrozenEuronorm carte 600 * 400132 Liters800 * 600 * 715 mmEuro-pallet 800 * 600 132 Liters800 * 600 * 715 mm

Bac 420

AmbientChilledFrozenEuro-pallet 800 * 1200420 Liters1200 * 800 * 1050 mm

Bac 600

FrozenSpecial size600 liters1200 * 1200 * 970 mm

Roll 1300

AmbientChilledFrozenPalette Asia 1100 * 11001285 Liters1100 * 1100 * 1930 mm

Box 34

AmbientChilledFrozenSpecial size34 liters555 * 360 * 331 mm
prod box 64 olivo insulated container

Box 64

Outer dim. in mm (L x D x H) 595 x 395 x 455 mmInner dim. in mm (L x D x H)505 x 320 x 370 mm
roll 370

Roll 370

Outer dim. in mm (L x D x H) 800 x 600 x 1670 mmInner dim. in mm (L x D x H)620 x 430 x 1370 mm

BAC 320

Outer dim. in mm (L x D x H) 1200 x 800 x 930 mmInner dim. in mm (L x D x H)980 x 580 x 570 mm

Frequently Asked Questions


Olivo insulated container is an exclusive product of Olivo, the world’s leading manufacturer of insulation boxes. Olivo is headquartered in France and cooperates with more than 30 partner units globally. Specco2 is proud to be one of the trusted and exclusive distributors of Olivo insulated cabinets in Vietnam.

Read more: What is insulated container ?

Olivo insulation containers that Specco2 provides are divided into 3 main product lines, depending on the needs of customers.

  • Olivo insulated containers with wheels
  • Olivo insulated containers without wheels
  • Standing Olivo insulated containers

The main difference between the product types is the volume and size of each type of insulated containers

In principle, Olivo Insulated Containers operates very simply. The inside of the box will have an insulated partition, or an insulated door, to protect the product being transported inside from outside heat. With such an ideal design, Olivo coolers are preferred for transporting goods

Olivo Insulated Containers are often used in transporting products in the following fields:

  • Dry Ice
  • Frozen Food
  • Medicine
  • Catering Service
  • Last-miles in the supply chain

The insulation quality of Olivo containers is assessed by the product’s thermal conductivity value, known as the K-factor. The K-factor represents the overall heat loss of the product. If product A’s K-factor is lower than product B’s K-factor, product A’s insulation will be better than product B’s.

When buying Olivo insulated containers, customers need to pay attention to this K-factor, which is an extremely important indicator that is applied to all insulation products.

The insulation capacity of the insulated containers directly affects the quality of the preserved product. It is not possible to determine the K-factor of an insulator with the normal eyes, but must be done in a laboratory with experienced experts.

Before buying any insulated containers, Specco2 experts will give you free advice on the necessary information of the product

Olivo’s cooling system not only helps protect the product inside the insulated container but also helps maintain a stable temperature inside the refrigerator and can prolong the product’s transit time.

A great feature of Olivo coolers is that these products can maintain temperature for a long period of time. More convenient, customers can adjust according to the estimated shipping time.

The storage capacity of Olivo insulated containers is designed so that you do not need to use any external power source to maintain the temperature of the container.

In addition, the Olivo cooler is considered by many experts to be a suitable product for all transportation conditions. Better yet, Specco2’s Olivo products can keep the heat for dozens of hours before being transported to the last destination.

Even in unpredictable situations such as traffic jams, rush hour transportation, the product’s temperature is always maintained at an appropriate level and does not disrupt the supply chain.

Olivo Insulated Containers are designed to fit into a closed supply chain, avoiding the waste of available resources.

While being able to maintain a moderate temperature, other features that also make Specco2’s Olivo insulated cabinets more environmentally friendly include:

  • Can be disassembled easily
  • Ability to customize many different temperature levels
  • Designed for ease of use
  • Using natural ventilation
  • Using refrigerant is recycled CO2 gas, environmentally friendly

Olivo Insulation Cabinets combine efficiency and simplicity to meet the demands of modern supply chain services, which are increasingly demanding in terms of cost, quality and safety.

Interested in our Equipments?

Get I touch with our team of agents. 

How does it clean?

Dry ice cleaning uses solid CO, a non-abrasive media that won't damage surfaces or equipment. The super cooled dry ice pellets or particles are accelerated at supersonic speeds and sublimate on impact, resulting in the surface being cleaned, lifting dirt and contaminants off the underlying substrate.

How it works...

Instead of abrasive media to grind surfaces (and damage them), Cold Jet uses dry ice (Solid CO2) accelerated at supersonic speeds that sublimate upon impact and lift contaminants from substrates.

Our Latest News

See our dry ice solutions in action

 Can dry ice be used to clean electrical components

 Can dry ice be used to clean electrical components

The  dry ice blasting machine is used to clean the surface of many production equipment, especially the stains on the surface of the injection mold in the manufacturing industries. In addition, the dry ice machine is also used for maintenance and general cleaning of factories and workshops. With such a powerful cleaning ability, can the […]

How to safely clean delicate electronics with dry ice?

How to safely clean delicate electronics with dry ice?

As mentioned before, besides being used to clean molds in industries, dry ice machines are also used to clean and sanitize electronic devices such as electronic boards, In this article, Specco2 will guide you to clean electronic equipment safely with a dry ice blasting machine When will you need to clean electric equipment After a […]

Soda blasting vs Dry ice blasting

Soda blasting vs Dry ice blasting

When it comes to surface cleaning or surface preparation, there are many methods available. Dry ice blasting and soda cleaning are two of the most popular methods chosen by many businesses. However, choosing the most optimal method is not easy. In this article, Specco2 will introduce you to the comparison between the dry ice machine […]

Industry Overview

By Applications

We've been able to cut back on our use of chemical solvents. We use about 25% of what we used to, which makes us a much more environmentally responsible company

Matt Schrift Engineer Robotworx

It's better for the people and for the environment. This technology has shaved time and allowed us to reduce our use of chemicals.

Bob Hawkey Vers-Trim

Using dry ice cleaning reduces harmful air emission and generally creates no addition to the volume of the cleaning process waste stream...in-process machinery can be cleaned on-line, resulting in decreased labor cost and less down-time.

EPA 905-F-00-026 EPA technical fact sheet for TCA hazard and alternatives

    We Offer Cleaning & Rental Services

    Our service team is available 24/7, 365 days a year and is dedicated to providing support and advice on all aspects of our machines.

    Aero 40FP

    SDI 60

    Xcel 6

    Book A Demo?

    We are happy to come to your facility and do a professional product demo for you. Please contact us by filling the form below, so we can schedule a time that suits you best.

    Interested in our Equipments?

    Get in touch with our team of agents.